Tedder tire complete. Ribbed tire and rim assembly,
16" x 6.50"-8", 6 ply, 1" bore, 25 mm, hub length 3.18", (includes bearing 6205-2RS).
Fits most tedders. Tedders: Krone, Kuhn, John Deere, New Holland, M&W, and Sitrex (with 16" X 6.50" X 8" tire).
Emblem. Ford Front Hood. Metal. Red script on gray background.
Voltage regulator. Fits D5NN10300E, D5NN10300D, D6NN10300A, D7NN10300B or D5NN10300D alternators. Tractors: 7AG (with D5NN10300E alternator, 1975 and up), 8000, 9000, TW10, TW20, TW30 (with D7NN10300B and D5NN10300D alternator, 3/1975 and up, replaces D3NN10316A regulator), Industrials: 550 (with D5NN10300E, D3NN10300B alternator, 1975 and up), 650 (with D5NN10300D alternator, 11/1975 to 1977).
Wedge. 10" hole center to hole center. Retard flow of hay thru baler, thus allows for a more dense bale. Fits any 14x16, 14x18, or 16x18 inch NH baler.
Fits Ford 501 Series Mower Models 14-320, 321, 339, 340.
1/4"-20x2-1/4" hex head, nuts: 1/4" -20, steel, hex locknut, zinc plated. For flywheel. Balers: 10, 14T (s/n 32868 & up), 24, 214 (also power take off), 216, 224, 323W
Priced by the nut & bolt. Order in Multiples of 10
Rear pitman strap. Ford/New Holland Mowers: 14-320, 14-321, 14-339, 14340, 14-92, 14-93, 501. IHC: Sickle: Cub 22 direct cut: L-22, C-21,C-21M, C-24; 2C-F21 and 24, No. 24; HM-24, No. 23 side-mounted; 34F21, 34F24, U-F28, 24, 28, 5 foot, 6 foot and 7 foot cut width; A1-23 HIWAY, A21, A22, A24; No.31, No.32; 1A-22, No.22-4-1/2 foot and 5 foot cut width; 200, 230.
7/16"-14 x 2" hex head, grade 5, plain finish. Nuts are 7/16"-14 steel, hex locknut, zinc plated.
Priced by the nut & bolt. Order in Multiples of 10
SHORT LINES: Slip clutch disc for SC303219. 6-1/2" O.D., 2-5/8" center hole. 2 required. ACCESSORIES AND SUPPLIES: Friction disc, 2 req'd. 6-1/2" O.D., 2-5/8" center hole. For above clutch. Priced individually.
Tedder Tire, 3.50" x 6", Tri-Ribbed, 4 ply, 1" Bore, 2.28" Hub Length.
For Galfre, Kuhn, John Deere, New Holland, Rossi, Sitrex, Tonutti, and Vermeer