BALE SPEARS AND BUSHINGS

QUICK FILTER

BALE SPEARS AND BUSHINGS

12 products

Showing 1 - 12 of 12 products
View
BALE SPEAR MOUNTING BRACKET
AgSmart BALE SPEAR MOUNTING BRACKET SKU: 023-49669
Bale spear bolt on bracket. Square base. Steel plate with 4 holes, 4" long welded on sleeve, 5/8" u-bolts, 12mm hex bolt, nuts and washers. Fits all cross hole type 42mm spears. Replacement u-bolt 925-S583183CPT
$38.05
In stock, 51 units
U BOLT 5/8"X3-1/8"X5" OAL SQ CPT
AgSmart U BOLT 5/8"X3-1/8"X5" OAL SQ CPT SKU: 925-S583183CPT
Includes 2 each 5/8-11 ZP Nuts and 5/8" ZP Lockwashers.
$5.20
In stock, 3177 units
1/2" BOLT, NUT AND WASHER FOR BALE SPEARS. FITS ALL CROSS HOLE SPEARS.
1/2" BOLT, NUT AND WASHER FOR BALE SPEARS. FITS ALL CROSS HOLE SPEARS. SKU: CHB12
1/2" bolt, nut and washer for bale spears. Fits all cross hole spears.
$1.35
In stock, 9 units
BALE SPEAR PIN-ON 48" L X 45MM
BALE SPEAR PIN-ON 48" L X 45MM SKU: BS4845CH
Bale spear. 48" long, 1.77" (45mm) diameter with cross hole. Rated at 3,700 lbs on a 30" load center.
$95.70
In stock, 11 units
STRAIGHT SLEEVE FOR BALE SPEARS. FITS ALL CROSS HOLE 45MM SPEARS.
STRAIGHT SLEEVE FOR BALE SPEARS. FITS ALL CROSS HOLE 45MM SPEARS. SKU: CHSS45
Straight sleeve for bale spears. Fits all cross hole 45mm spears.
$18.95
In stock, 10 units
BALE SPEAR W/SLEEVE & NUT
TISCO BALE SPEAR W/SLEEVE & NUT SKU: BS4845WNS
Bale spear. 48" long, tapered neck, 1.77" (45mm) diameter. Includes sleeve and nut. Rated at 3,700 lbs. on a 30" load center.
$100.90
Sold out
SLEEVE FOR PIN-ON BALE SPEAR
AgSmart SLEEVE FOR PIN-ON BALE SPEAR SKU: 023-49670
1.69" ID, 2.52" OD, 6" long with cross hole for 1/2" bolt.
$19.45
In stock, 27 units
STABILIZER SPEAR 17"L, 1.25" DIA
AgSmart STABILIZER SPEAR 17"L, 1.25" DIA SKU: 023-85857
Stabilizer bar with 5/16" pin hole. Overall length 17", 1-1/4" diameter. Made with C1045 cold rolled steel. Uses 85858 sleeve.
$20.45
In stock, 32 units
BALE SPEAR W/SLEEVE & NUT
TISCO BALE SPEAR W/SLEEVE & NUT SKU: BS3945WNS
Bale spear. 39" long, tapered neck, 1.77" (45mm) diameter. Includes sleeve and double nut. Rated at 3,700 lbs. on a 30" load center.
$86.95
Sold out
Bushing for Stabilizer Spear # 485857
AgSmart Bushing for Stabilizer Spear # 485857 SKU: 023-85858
2.87" Long, 1.73" OD, 1.3" ID, Hole for 5/16" Bolt.
$6.05
In stock, 51 units
OPERATOR MANUAL CANISTER 12"X3.5"
AgSmart OPERATOR MANUAL CANISTER 12"X3.5" SKU: 023-67670
High Density Polypropylene Resists Weather And Impact Damage, Neoprene Cap Seal Locks Out Water And Dirt, 1/4" Molded Holes For Ease Of Mounting.
$6.75
In stock, 303 units
BALE SPEAR W/SLEEVE & NUT
TISCO BALE SPEAR W/SLEEVE & NUT SKU: BS4336WNS
Bale spear. 43" long, tapered neck, 1.41" (36mm) diameter. Includes sleeve and nut. Rated at 3,000 lbs. on a 30" load center.
$58.90
Sold out