BOX BLADE SHANKS AND POINTS

QUICK FILTER

BOX BLADE SHANKS AND POINTS

15 products

Showing 1 - 12 of 15 products
View
1-3/4 SCARIFIER TOOTH W/ HOLES
1-3/4 SCARIFIER TOOTH W/ HOLES SKU: Y8075
Fabco 1-3/4" scarifier bucket tooth with holes.
$6.85
In stock, 92 units
PIN REMOVER / FAB TEETH
PIN REMOVER / FAB TEETH SKU: YA23W
Pin master pin remover for fabricated teeth.
$32.40
Sold out
CAPPED CRIMP TOOTH 1/2X2X6
CAPPED CRIMP TOOTH 1/2X2X6 SKU: 972-41WILOC
Crimp-on Tooth will fit Hamby, Roll-A-Cone, Bigham, Johnson, Howard & Texas Rippor. Standard tooth for box scrapers - 1 1/2" wide x 6" long - Capped
$9.85
Sold out
SHANK BOX BLADE 16" REAR NTCH W/PT
AgSmart SHANK BOX BLADE 16" REAR NTCH W/PT SKU: 873-103109
15.7" 3 rear notch shank with crimped-on point. Shank is made from 5160 spring steel. Point is heat-treated. Fits Atlas.
$28.05
In stock, 7 units
BENT HITCH PIN 1/2"X3" USABLE
AgSmart BENT HITCH PIN 1/2"X3" USABLE SKU: 873-7111
Hitch Pin 1/2" x 3" Usable Length Qty: (1 Pc)
$1.65
In stock, 1915 units
Min/Multiple: 5
CAT STYLE RETAINER
CAT STYLE RETAINER SKU: Y8E6209
Fabco CAT style retainer for bucket tooth.
$5.80
In stock, 30 units
POINT CAST ALLOY W/ FULL CAP & NOSE CAP
POINT CAST ALLOY W/ FULL CAP & NOSE CAP SKU: 693-2D5BE
Scarifier and Backhoe Teeth 1 5/8" wide x 6 1/2" long (less cap) Replaces: Bucyrus CAW-GT014, Caterpillar 580946, Champion 8111, Fiat Allis 062160, WABCO 120746. Cast Alloy Point with Full Bottom and Nose Cap
$45.80
Sold out
REPLACEMENT FOOT
REPLACEMENT FOOT SKU: 693-8201
This Weld On Foot piece is used where the shank is worn and needs to be replaced. Instead of a customer buying a whole new shank, he can cut off the old foot and weld this one on.
$83.40
Sold out
WINGED COTTON POINT
WINGED COTTON POINT SKU: 686-2D5W
2D5 Cotton Point, 8.5" long with welded and hardsurfaced wings. Width across wings is 10".
$93.20
Sold out
CAT STYLE ROLL-PIN
CAT STYLE ROLL-PIN SKU: Y8E6208
Fabco CAT style roll-pin for bucket tooth.
$3.15
In stock, 67 units
POINT PLAIN CAST ALLOY
POINT PLAIN CAST ALLOY SKU: 693-2D5
Scarifier and Backhoe Teeth 1 5/8" wide x 6 1/2" long (less cap) Replaces: Bucyrus CAW-GT014, Caterpillar 580946, Champion 8111, Fiat Allis 062160, WABCO 120746. Ductile iron.
$17
In stock, 70 units
SHANK BOX BLADE 16" 3-HOLE W/PT
AgSmart SHANK BOX BLADE 16" 3-HOLE W/PT SKU: 873-103107
15.7" shank with punched holes and crimped-on point. Shank is made from 5160 spring steel. Point is heat-treated. Fits Ag-Meier, Kodiak, Southern, King Kutter, Monroe-Tufline, Howse, Great Plains.
$26.45
Sold out