BANJO

QUICK FILTER

BANJO

395 products

Showing 1 - 12 of 395 products
View
Banjo 300G EPDM Gasket 3"
Banjo Banjo 300G EPDM Gasket 3" SKU: 909-300G
EPDM gasket for 3" cam couplings and TF150, TF200 tank fitttings.
$0.95
In stock, 205 units
Banjo TF300 Polypropylene Bulkhead Tank Fitting, 3" FNPT
Banjo Banjo TF300 Polypropylene Bulkhead Tank Fitting, 3" FNPT SKU: 909-TF300
EPDM Gasket, 4-1/2" Hole Size
$38.50
In stock, 12 units
Banjo TF075 Polypropylene Bulkhead Tank Fitting, 3/4" FNPT
Banjo Banjo TF075 Polypropylene Bulkhead Tank Fitting, 3/4" FNPT SKU: 909-TF075
Banjo TF075 Poly Bulkhead Tank Fitting, 3/4" Female NPT, w/EPDM
$8.40
In stock, 84 units
Poly Fittings EPDM Poly - 5"
Banjo Poly Fittings EPDM Poly - 5" SKU: 909-TF050
EPDM Gasket, 1-5/8" Hole Size
$9.05
In stock, 35 units
Banjo LS200-120 2" x 2" Y Strainer with 120 Mesh, 316 SS Screen
Banjo Banjo LS200-120 2" x 2" Y Strainer with 120 Mesh, 316 SS Screen SKU: 909-LS120
Standard Mesh Data (For General Use ONLY): 120 Mesh, 125 Microns, 0.0037" Wire Diameter, 0.0046" Opening Size, 30.5% Open Area.
$9.22
Sold out
2" 90 DEG FEMALE CPLR 2" MALE THDS
Banjo 2" 90 DEG FEMALE CPLR 2" MALE THDS SKU: 909-200B90
$10.11
Sold out
Banjo LS05040 Strainer 1/2 Inch, 40 Mesh
Banjo Banjo LS05040 Strainer 1/2 Inch, 40 Mesh SKU: 909-LS05040
$12.66
Sold out
Banjo 12703A Poly Pump Rear Bracket
Banjo Banjo 12703A Poly Pump Rear Bracket SKU: 909-12703A
Replacement Parts
$33.26
Sold out
Banjo E Series 1/2" Poly Male Coupler x Hose Shank
Banjo Banjo E Series 1/2" Poly Male Coupler x Hose Shank SKU: 909-050E
This Banjo 050E polypropylene cam and groove fitting has a 1/2" male adaptor and a shank to fit a hose with a 1/2" inside diameter. The hose shank is long and has barbs for a tight seal. This fitting is made of polypropylene for strength and rigidity and features American Iron and Steel Institute (AISI) 304 stainless steel rings, cam levers, and pin for resistance to rust and bending. This connector has a temperature range from -20 to +150 degrees F and a maximum working pressure of 125 PSI. It is interchangeable with all types of cam lever couplers. This fitting is suitable for use in hydraulic, pneumatic, and plumbing applications.
$1.99
Sold out
T BOLT CLAMP 3.43TO 3.75''
Banjo T BOLT CLAMP 3.43TO 3.75'' SKU: 909-TC343
Banjo TC343 3" T-Bolt Hose Clamp with min/max inner diameter of 3.43"/3.75" a max torque of 125 in-lbs. Stainless steel construction, Stainless steel bolt with silver plated nut to prevent seizing, 360 Degree sealing surface, Ideal for high torque applications, Nylon lock nut feature, Strong, positive connections where ordinary hose clamps fail, T-bolt design, 3 spot welds for extra strength.
$3.40
Sold out
Banjo TF220G 2" Bulkhead EPDM Gasket
Banjo Banjo TF220G 2" Bulkhead EPDM Gasket SKU: 909-TF220G
EPDM gasket for Banjo TF200, TF220 tank fittings.
$2.26
Sold out
1 1/2" Nozzle Pipe Only (VA150 and VA200150)
Banjo 1 1/2" Nozzle Pipe Only (VA150 and VA200150) SKU: 909-V20166
Spout for VA150 Ball Valve
$2.62
Sold out