JACKS

QUICK FILTER

JACKS

95 products

Showing 1 - 12 of 95 products
View
Gate Jack for Adams Fertilizer Buggies
Gate Jack for Adams Fertilizer Buggies SKU: 402-4506
This jack is for the rear gate of fertilizer spreaders, not designed for lift or holding a load. Has no weight rating.
$14.55
In stock, 129 units
Coupler A Frame 2 inch Ball-Type-Class 4
Coupler A Frame 2 inch Ball-Type-Class 4 SKU: 402-228287
7000# Capacity. Has low profile latch.
$42.85
In stock, 39 units
Base Foot for A-Frame Jack
Base Foot for A-Frame Jack SKU: 402-0091269
$9.30
In stock, 51 units
AGSMART FARM JACK - CAST IRON 48"
AGSMART FARM JACK - CAST IRON 48" SKU: 427-HL486
48" AgSmart Farm Jack. Built of heavy duty cast iron. Has 3.5 Ton lifting capacity, 48" max lifting height, 36" handle.
$79.70
In stock, 84 units
Weld-On MTG Tube-250 Jacks 500139
Weld-On MTG Tube-250 Jacks 500139 SKU: 402-500139
RAM Jack Male Mounting Tube for 9/16" Pin. Tube is 1-7/8" long. Carded. Fits 258451, 258452, 258109, 258151, 278101, 278151.
$3.40
In stock, 55 units
Mounting Tube for Jacks with 5/8" Pin
Mounting Tube for Jacks with 5/8" Pin SKU: 402-TJPIP58
Fits 178201, 178203, 278201 and 278203. 2" OD, 1.53" ID, 2.25" Long.
$3.85
In stock, 20 units
Top Cap for Bulldog SW Jack
Bulldog Top Cap for Bulldog SW Jack SKU: 402-015500
Bulldog Jack End Cap Replacement Part.
$3.95
Sold out
WELD-ON TUBE MOUNT COMPATIBLE WITH TUBE MOUNT JACKS WITH 5/8" TUBE MOUNT.
10" Lift x 2,000 lb, Side Wind, Tube Mount, Bulldog Jack. Replaces Vermeer 93822-001
3M# 15" SW TUBE MOUNT JACK
3M# 15" SW TUBE MOUNT JACK SKU: 402-278203
15" Lift x 5.000 lb, Side Wind, Tube Mount Jack. 5/8" Pull Pin
$45.25
In stock, 2 units
10" Lift x 5,000 lb, Top Wind, Tube Mount, Bulldog Jack
Bulldog 10" Lift x 5,000 lb, Top Wind, Tube Mount, Bulldog Jack SKU: 402-178101
$86.45
Only 1 unit left
15" Lift x 2,000 lb, Top Wind, Swivel Mount Jack
15" Lift x 2,000 lb, Top Wind, Swivel Mount Jack SKU: 402-251421
$29.70
In stock, 121 units