AG WHEELS, HUBS AND SPINDLES

Timken TIMKEN OIL & GREASE SEAL-17485 SKU: 143-200854
In stock, 38 units

Timken TIMKEN OIL & GREASE SEAL-17404 SKU: 143-472193
Sold out

3 X 16 INCH SPINDLE FOR 281189 ( 75-8 ) SKU: 982-281911
Made in the USA - Spindle nut and washer sold separately In stock, 9 units

TISCO 1/2"-20 WHEEL BOLT WITH 1 INCH THREAD LENGTH SKU: 906863M1
Fits front wheel on tractors: MF231, MF240, MF250 except Lo-profile, MF253; industrials: 20D turf or adjustable axle. Replaces 887135M1. Only 1 unit left

TISCO RIM 19X4.00 6 BOLT SKU: 8N1015A
Front wheel, six lug. 4-9/16" center hole. Wheel uses 4.00" x 19" tire. Tractors: 8N (1948 to 1952). Sold out

TISCO 5/8"-18 WHEEL BOLT WITH 2-7/8 INCH THREAD LENGTH SKU: 828217M1
For rear wheel disc to rim. Use with nut 353427X1 In stock, 40 units

WASHERS - 6 PACK SKU: 351505K6
Flat washer kit, 5/8", rear wheels and front axle bolts. Set of six. Tractors: 9N, 2N, 8N, NAA {1939-1954}. In stock, 3 units

WASHERS - 16 PACK SKU: 351505K16
Flat washer kit, 5/8", rear wheels and front axle bolts. Set of 16. Tractors: 9N, 2N, 8N, NAA (1939-1954). In stock, 3 units

BOLT SKU: 350719S8
Bolt, rear rim center disc to rim, 5/8" x 18 x 2.82". Tractors: 9N, 2N, 8N, NAA (1939-1954). In stock, 51 units

AgSmart 12 INCH SPINDLE TUBE FOR CASE IH SKU: 864-SMA9801
Spindle tube (weld in) for Models 48, 470, 480, 490, 500 and 610 transport wheel axle assembly #481474R93. ID is 1.75", OD is 2.375", Length is 12", has 2 7/16" drilled holes 1" from each end. Sold out

Timken TIMKEN OIL & GREASE SEAL-17146 SKU: 143-442251
In stock, 41 units

8 BOLT 5790 LB. CAP HUB WITH CUPS W821 SKU: 982-280681
8 Bolt, 8" Bolt Circle, 6" Pilot Agricultural Hub with Cups - 5790 lb. capacity - Component parts sold separately. Fits Scott Land Plane. Sold out