Adapter kit. Can replace OEM adapter plate 9613790. HV5902 kit features a plate with three ports: (1) pressure port, (1) power-beyond port and (1) return port. All ports 3/4 inch - 16 ORB. Use with a remote valve that has power beyond. Good for applications where valve might incurr shockloads, like loaders. Shock is directed to the tank preventing damage to the rest of the system. Kit contains adapter plate, o-rings, mounting bolts, plugs, and instructions. For models with single-pump hydraulic system. Tractors: 500-900 (1955-1960), 2000, 4000 (USA-1964), 2000-5000 (1965-1975), 2600-6600 (1975-1981). Industrials: 230-545. Not for AG 10 series, 5900 produced after April 1986, or industrial C- or D- series tractors. Contains: 1-721FSO-1/2 hyd adaptor, 1-HV5901 adaptor plate, 1-PP1/4 pipe plug, 2-9-OR o-ring, 5-11-OR o-ring, 1-223-OR o-ring, 2-HV4908 bolt, 2-HV4909 bolt, 2-7/16-14X3-3/4 capscrew, 1-HV4903 bolt, 3-60UB-08X08 HSA23 adaptor.
Adapter plate kit. For use with remote valves that do not have a power beyond port. Contains 1-HV4901 adapter plate, mounting cap screws, o-rings and mounting instructions. 3/8 inch NPT points. For models with single-pump hydraulic system. Tractors: 500-900 (1955-1960), 2000-4000 (USA-1964), 2000-5000 (1965-1975), 2600-6600 (1975-1981). Industrials: 230-545.
Handle with blue vinyl coated grip, for 1 & 2 spool valves.
Selector/isolator assembly. For TO35 & later tractors thru MF1080, without individual external hydraulic systems. Three-position spool, forward position allows one-way (push) for single acting cylinder. Center position allows operation of the 3-point arms, & the rear position will feed power to a 4-way control valve for two-way (push-pull) operation of double acting cylinder. Fits all MF tractors where 182373M1 lift cover is used.
Safety valve assembly for hydraulic pump. Tractors: 9N, 2N, 8N.
Knob. Used for drawbar coupler lever, hydraulic lever, snap coupler lever and seat base. .466 inch hole ID, 1.213 inch overall length. Tractors: Hydraulic lever: CA, G, D17. Drawbar coupler lever: WD, WD45, D10, D12, D14, D15, D17, 180, 185, 190, 190S5, 200, 210, 220. Snap coupler lever: D10, D12, D14, D15. Seat base: 180, 185, 190, 190XT, 200, 210, 220. Vintage Iron.
Pivot bolt for handles.
Control lever knob. Three used per tractor, sold individually. Tractors: D10, D12, D14, D15, D17, D19. Lawn & Garden: 116, 122. Vintage Iron
Bushing for front mount hydraulic adapter plates. Tractors: MF35, MF50, MF65, MF135, MF150, MF165, MF175, MF235 orchard, MF245 orchard. Industrials: 20, 20C, 30, 30B, 30D, 35, 40, 40B, 40E, 50, 50A, 50C, 50D, 202, 203, 204, 205, 2135, 2200, 3165. Used in adapter plates 704812M93 & 708639M91.
Adapter plate kit for Kubota L2250, 2550 and 2850 tractors. Allows oil to be plumbed from LH rear of tractor hydraulic top cover to remote hydraulic valve. All other hydraulic systems on tractor remain fully live and independent. NOTE: You must use a valve equipped with power beyond capability. This is a 3 port adapter, P-pressure, R-return & PB-power beyond ports. All ports 9/16 inch - 18 ORB. Kit is complete with o-ring seals. Use existing hardware. Mounting instructions included.