Control lever knob. Three used per tractor, sold individually. Tractors: D10, D12, D14, D15, D17, D19. Lawn & Garden: 116, 122. Vintage Iron
| Make | Type | Model |
|---|---|---|
| Allis Chalmers | Tractor | D10, D12, D14, D15, D17, D19 |
O-Ring, 3/16" wide, 2-5/8" I.D. x 3" O.D. Buna-N Rubber. For use in plumbing, hydraulics, heavy equipment, automotive, irrigation and more. 10 per package, sold by the package. Made of 70 Durometer Buna-N Rubber.
Bushing for front mount hydraulic adapter plates. Tractors: MF35, MF50, MF65, MF135, MF150, MF165, MF175, MF235 orchard, MF245 orchard. Industrials: 20, 20C, 30, 30B, 30D, 35, 40, 40B, 40E, 50, 50A, 50C, 50D, 202, 203, 204, 205, 2135, 2200, 3165. Used in adapter plates 704812M93 & 708639M91.
Hydraulic lift housing cover gasket. Tractors: NAA.
| Make | Type | Model |
|---|---|---|
| Ford_New Holland | Tractor | NAA |
External hydraulic valve kit, single spool, double acting control valve. Contains :2-BL1334X38 hex bushing, 1-TS300 isolator valve, 1-TS200BA valve ,2-4000-4 coupler, 1-S42-4 clamp, 1-849FS-06X06 hydraulic adaptor, 2-BL912 street elbow,1-TS3241 hydraulic hose assy, 1-TS3230 hyd hose assy, 1-TS3221 hyd hose assembly, 1-TS3218 hyd hose assembly, 1-HB616 cap screw, 2-HP645 MTG spacer, 2-HB628 cap screw, 2-HB644 cap screw, 3-HB6HN nut, 3-HB6FW washer, 3-HB6LW washer. Includes instructions.
1/16" width, 3/4" I.D., 7/8" O.D., 70 degree Durometer
Adapter plate kit for Kubota L2250, 2550 and 2850 tractors. Allows oil to be plumbed from LH rear of tractor hydraulic top cover to remote hydraulic valve. All other hydraulic systems on tractor remain fully live and independent. NOTE: You must use a valve equipped with power beyond capability. This is a 3 port adapter, P-pressure, R-return & PB-power beyond ports. All ports 9/16 inch - 18 ORB. Kit is complete with o-ring seals. Use existing hardware. Mounting instructions included.
| Make | Type | Model |
|---|---|---|
| Kubota | Tractor | L2250, L2550, L2850, L2950, L3250, L3450, L3650 |
Piston ring, .91" dia. hydraulic lift pump, 2 required on piston 190799M1. Supersedes 190848M1.
ADAPTER PLATE, FOR FRONT MOUNTED HYDRAULIC PUMP DRIVE. 5-1/4" DIA. WITH 3 BUSHINGS, MOUNTING HOLES 3.465" ON CENTER, 4" BOLT CIRCLE, 3/4" LEFT HAND THREADED CENTER HOLE. TRACTORS: MF35, MF150, MF65, MF135, MF150, MF235 ORCHARD, MF245 ORCHARD.