SUBSOILER/RIPPER

    SUBSOILER/RIPPER

    93 products

    Showing 25 - 36 of 93 products
    View
    CHROMIUM CARBIDE INSTEP RIGHT HAND
    AgSmart CHROMIUM CARBIDE INSTEP RIGHT HAND SKU: 693-003R
    Chromium Carbide Instep for Parabolic Subsoiler.
    $45.64
    In stock, 147 units
    Min/Multiple: 1

    BOOTED SUBSOILER WITH CAP & WINGS FOR JOHN DEERE
    AgSmart BOOTED SUBSOILER WITH CAP & WINGS FOR JOHN DEERE SKU: 972-41B2512JDW
    $102.49
    In stock, 134 units
    Min/Multiple: 1

    3/8 X 2 INCH ROLL PIN
    3/8 X 2 INCH ROLL PIN SKU: 444-RP38X2
    Used on 41B2512JD and other ripper points.
    $0.90
    In stock, 834 units
    Min/Multiple: 1

    SUBSOILER POINT BOOTED KMC
    AgSmart SUBSOILER POINT BOOTED KMC SKU: 972-34800
    1-1/4" wide x 1-1/4" thick x 11" long. Inside width of boot is 13/16" for 3/4" wide shank. Will replace KMC 16-080-075
    $27.83
    In stock, 11 units
    Min/Multiple: 1

    BOOTED RIPPER POINT
    BOOTED RIPPER POINT SKU: 972-PBS30012
    1 inch thick (without cap) X3 inch wide X 14-3/4 inch overall length. Full chrome cap installed. For 1-1/2 inch shank. Uses 444-RP12X3 roll pin.
    $109.92
    In stock, 31 units
    Min/Multiple: 1

    CHROMIUM CARBIDE LOWER SHIN LH
    CHROMIUM CARBIDE LOWER SHIN LH SKU: 693-005L
    Chromium Carbide Lower Shin for Parabolic Subsoiler
    $80.30
    In stock, 95 units
    Min/Multiple: 1

    SUBSOILER POINT FOR JOHN DEERE
    SUBSOILER POINT FOR JOHN DEERE SKU: 972-412013JD
    Subsoiler Point produced from high carbon steel and heat-treated. Made in the USA Bolt-on - 1 x 2 x 13. Uses 1/2" plow bolt.
    $38.20
    In stock, 23 units
    Min/Multiple: 1

    8 INCH AGRITUF NO-TILL POINT FOR CASE IH ECOLO TIGER INLINE RIPPER
    AGRITUF 8 INCH AGRITUF NO-TILL POINT FOR CASE IH ECOLO TIGER INLINE RIPPER SKU: ATSRC8NT-34
    Replaces 87388006 and Nichols RPDM158FCP.Use bolt kit AT425108 
    $188.49
    In stock, 623 units
    Min/Multiple: 1

    1-1/2 X 14 INCH CHROMIUM CARBIDE HALF-ROUND SHIN GUARD
    1-1/2 X 14 INCH CHROMIUM CARBIDE HALF-ROUND SHIN GUARD SKU: 2179-D035
    $42.86
    In stock, 101 units
    Min/Multiple: 1

    1-1/2 X 10 X 5/16 INCH CHROMIUM CARBIDE FLAT SHIN GUARD
    1-1/2 X 10 X 5/16 INCH CHROMIUM CARBIDE FLAT SHIN GUARD SKU: 2179-D034
    $12.79
    In stock, 134 units
    Min/Multiple: 1

    RIPPER PT SE342 WITH CHROME 1-1/4 BIG-ED
    RIPPER PT SE342 WITH CHROME 1-1/4 BIG-ED SKU: 2179-17SE342CR
    $52.44
    Sold out

    2-1/2 INCH AGRITUF SUPERRIP POINT FOR CASE IH 1-1/4 INCH SHANK
    AGRITUF 2-1/2 INCH AGRITUF SUPERRIP POINT FOR CASE IH 1-1/4 INCH SHANK SKU: ATSRC212-114
    Replaces 87460075
    $180.49
    Sold out
    Min/Multiple: 1