SUBSOILER/RIPPER
QUICK FILTER
SUBSOILER/RIPPER
95 products
Showing 13 - 24 of 95 products
Display
View
AgSmart
CHROMIUM CARBIDE UPPER SHIN RH
SKU: 693-004R
Chromium Carbide Upper Shin for Parabolic Subsoiler
Chromium Carbide Upper Shin for Parabolic Subsoiler
$165.42
In stock, 66 units
AgSmart
SUBSOILER POINT 1-1/4"X1-3/4"X11" BOOTED KMC
SKU: 972-15483
1-3/4" wide x 1-1/4" thick x 11" long. Inside width of boot is 1-1/16" for 1" wide shank. Will replace KMC 16-080-096.
1-3/4" wide x 1-1/4" thick x 11" long. Inside width of boot is 1-1/16" for 1" wide shank. Will replace KMC 16-080-096.
$43.76
Sold out
WEAR SHIN FOR KMC
SKU: 972-KMC100
Will replace KMC 17-057-004. 5/16 inch x 1-3/8 inch spirol pin (3) required KMC 17-050-022
Will replace KMC 17-057-004. 5/16 inch x 1-3/8 inch spirol pin (3) required KMC 17-050-022
$15.15
Sold out
AgSmart
RIPPER SHANK FOR CASE IH and DMI 2500 IN-LINE RIPPER (PRE 2008) - 3/4 INCH
SKU: 972-33020046
3/4 inch No-Till Shank for Case IH and DMI EcoloTill 2500, 2500 Rip-Strip, 2500 Rip-Bed prior to 2008. Replaces 33020046.
For units built after 2008, order 972-87665693
$105.50
In stock, 183 units
AgSmart
SUBSOILER POINT 1 INCH X 2-1/2 INCH X 12 INCH BOOTED/CAPPED FOR JD
SKU: 972-41B2512JDC
Subsoiler Point produced from high carbon steel and heat-treated. Available in most styles with high chrome cap installed. High chrome will outwear plain by up to 10 times. Made in the USA Booted - 1 x 2 1/2 x 12 - Capped. Uses 3/8 inch x 2 inch spring pin.
Subsoiler Point produced from high carbon steel and heat-treated. Available in most styles with high chrome cap installed. High chrome will outwear plain by up to 10 times. Made in the USA Booted - 1 x 2 1/2 x 12 - Capped. Uses 3/8 inch x 2 inch spring pin.
$69.08
In stock, 61 units
SHEAR BOLT FOR PARATILL
SKU: 693-TY1512
Shear bolt for ParaTill. Measures 1-1/8 inch X 5-1/2 inch . Will replace 6101822. Uses 693-TY1512N lock nut.
Shear bolt for ParaTill. Measures 1-1/8 inch X 5-1/2 inch . Will replace 6101822. Uses 693-TY1512N lock nut.
$20.10
In stock, 160 units
AgSmart
RIPPER POINT FOR KMC/UNVERFERTH
SKU: 972-69547KU
Has oblong mounting hole for dual applications, KMC and Unverferth. 1-3/8 inch square base and narrow boot for 3/4 inch shank, wear cap and fin. Will replace KMC 16-080-282.
Has oblong mounting hole for dual applications, KMC and Unverferth. 1-3/8 inch square base and narrow boot for 3/4 inch shank, wear cap and fin. Will replace KMC 16-080-282.
$44.37
In stock, 452 units
AGRITUF
10 INCH AGRITUF AGGRESSIVE RIPPER POINT FOR CASE IH 1-1/2 INCH SHANK
SKU: ATSRC10A-112
Replaces 4805896
Replaces 4805896
$268.45
In stock, 331 units
SUBSOILER POINT 1"X2-1/2"X12" BOOTED FOR JD
SKU: 972-41B2512JD
Subsoiler Point produced from high carbon steel and heat-treated. Available in most styles with high chrome cap installed. High chrome will outwear plain by up to 10 times. Made in the USA Booted - 1 x 2-1/2 x 12. Uses a 3/8" x 2" spring pin to mount
Subsoiler Point produced from high carbon steel and heat-treated. Available in most styles with high chrome cap installed. High chrome will outwear plain by up to 10 times. Made in the USA Booted - 1 x 2-1/2 x 12. Uses a 3/8" x 2" spring pin to mount
$42.01
In stock, 40 units
AGRITUF
7 INCH AGRITUF SUPERRIP POINT FOR CASE IH 1-1/2 INCH SHANK
SKU: ATSRC7-112
Replaces 48058575
Replaces 48058575
$224.35
In stock, 174 units
Filters (0)
Categories
QUICK FILTER
ATTRIBUTES FILTER
No results found!
No more results found!