LIFT ARM AND STABILIZER

AgSmart SLEEVE BUSHING - CATEGORY 1 SKU: 873-351
7/8 Inch ID X 1-1/8 Inch OD X 1-3/4 Inch long. Fits all Category 1 Draw Pins - Zinc plated In stock, 5 units

AgSmart LIFT ARM BUSHING CATEGORY 2-3 SKU: 873-3009
1-1/8" ID X 1-7/16" OD X 1-3/4" long. Fits all Category 2 Draw Pins - Zinc plated. In stock, 2505 units

AgSmart LIFT ARM BUSHING WITH HOLE CAT 2-3 SKU: 873-3010
Has hole for 7/16" Lynch Pin In stock, 1235 units

AgSmart LIFT ARM BUSHING CATEGORY 2-3 SKU: 873-3012
1-1/8" ID X 1-7/16" OD X 2-3/4" Long Lift Arm Reducing Bushing - Zinc plated. In stock, 530 units

AgSmart LIFT ARM BUSHING-CATEGORY 3-2 SKU: 873-3013
3.25" Long Lift Arm Reducing Bushing - Zinc plated. In stock, 375 units

AgSmart HD ADJUSTABLE STABILIZER ARM SKU: 873-628
Category 1 Heavy Duty Adjustable (Right Hand or Left Hand) - One piece forged ends - no welds to break. Adjusts from 27 1/2" to 35"; 7/8" pin holes; 7/8" threads. In stock, 286 units

AgSmart AgSmart® Rachet Jack SKU: 873-1541
Pin Hole - 1" pin size Min length 20" Max 28". 10,000 LB. push and 15000 LB. Pull. Replaces Woods 1005020. In stock, 264 units

AgSmart STABLILZER PIN AND LOCK NUT, 1/2" USABLE LENGTH SKU: 873-169
Stabilizer pin with nut and lock washer. 2-7/8" overall length, 7/8" diameter, 1/2" useable length, 1-1/4" thread length, 5/8" thread size. Replaces Ford 230044, Massey-Ferguson 18177M1. In stock, 20044 units

SLEEVE BUSHING - CATEGORY 1 AND 2 SKU: 873-3510
In stock, 405 units

AgSmart LIFT ARM WELD-ON END CATEGORY 2 SKU: 873-1342
Lift arm repair end, straight, forged. Category II, 1-1/8" pin hole, 1-3/4" Ball width,  2-3/4" width at weld end, 4-3/4" overall length. In stock, 117 units

TISCO STABILIZER ARM - RED 31-1/2" CENTER TO CENTER SKU: 230042R
In stock, 133 units

AgSmart CAT 2 LIFT ARM BALL-FD NRW SKU: 873-247
Category 2 (Narrow) - Ford Lift Arm Replacement Ball - Replaces Ford C5NN557B - Fits 3000, 4000, 5000 - 1 1/8" ID, 1-3/8" thru bore. In stock, 116 units