PTO

PTO shaft, heat treated, heavy-duty, 1-3/8". Tractors: 600, 700, 800, 900, 2000, 4000 (1954-1964), except Select-O-Speed (1959 & up).

PTO shaft, 1-3/8 inch dia. 6-spline. Tractors: MF35, TO35, MF50, MF135.

PTO shaft (shaft only), 11-5/8" long. Has groove for bearing snap ring. Tractors: Cub. Can replace 368433R91.

PTO drive shaft for independent PTO equipped tractors, 28 tooth. Tractors: 766, 966, 1066, 1466, (to s/n 14999); Hydro 100 to s/n 8999, 756 s/n 17636

PTO assembly 1-3/8" 6 Spline, 30-7/8" long. Tractors: 9N, 2N, 8N.

PTO shaft, 30-7/8". Converts standard 1-3/8" in PTO shaft 9N710B to 1-3/8" spline. Tractors: 9N, 8N.

Shaft, 15 teeth, PTO drive. Tractors: 5000, 7000 (dual range 8-speed transmission, 1965 to 1975), 5600, 5700, 6600, 6700, 7600, 7700, (dual range 7- &

Shaft, PTO rear. Length 29-1/2". Tractors: 2000, 3000 (6, 7, 8-speed & manual rev. transmission, 1965-1975), 2600, 3600 (6 & 8-speed & manual rev. tra

Shaft, PTO drive output, 540 rpm. Tractors: 5000, 7000 two-speed (6/1973-1975), 5600, 5700, 6600, 6700, 7600, 7700 two-speed (1975-1981), 8000, 9000 (

Shaft, PTO drive output, 1000 rpm, 21 splines. Tractors: 5000, 7000 two-speed (6/1973-1975), 5600, 5700, 6600, 6700, 7600, 7700 two-speed (1975-1981),

Shaft, PTO rear lower. For single-speed 540 rpm independent PTO. Tractors: 5000, 7000 (1965-5/1973).

Shaft, PTO rear. Length 30-11/16". Tractors: 4000 (w/ind. PTO, 1965-1975), 4100, 4600 (7 & 8-speed & manual rev. transmission, 1975-1981). Replaces C5

Shaft, PTO drive output, 1000 rpm. For 540/1000 rpm 2-speed independent PTO where shaft is held by snap ring. Tractors: TW10, TW20 (1979-1982), 5610,

Shaft, PTO rear lower. For single-speed 540 rpm independent PTO drive shaft. Tractors: 5000, 7000 (6/1973-1975), 5600, 5700, 6600, 6700, 7600, 7700 (1

Shaft, PTO drive output, 540 rpm. For single-speed 540 rpm independent PTO drive shaft. Tractors: 5000, 7000 (6/1973-1975), 5600, 5700, 6600, 6700, 76

PTO assembly 1-3/8" 6 Spline, 30-3/16" long. Tractors: NAA (1953-1954).