With a wide variety of tillage tools and parts like field cultivators, sweeps, tines, furrowers, plow shares, moldboards, shins, chisel and subsoiler points, ripper points, oil bath bearings, hipper parts and other tillage tools, Quality Farm Supply has everything you need to break ground, without breaking the bank. Our products fit models like Allis-Chalmers, Case IH, John Deere, Krause, Rome, Sundance, Towner, Sunflower and more.
AGRITUF
4 INCH AGRITUF DANISH S-TINE CULTIVATOR SWEEP - 7/16 BOLT HOLE
SKU: ATDT4-716
$14.78
In stock, 994 units
AGRITUF CHROME SHANK GUARD FOR JOHN DEERE RIPPER
SKU: ATSRSPD
Shank wear guard for John Deere Rippers with 1-1/4" Shank. Attaches with two 3/8 x 2-1/4 roll pins - RP24-18 or RP24-18-5
Shank wear guard for John Deere Rippers with 1-1/4" Shank. Attaches with two 3/8 x 2-1/4 roll pins - RP24-18 or RP24-18-5
$90.98
In stock, 300 units
AGRITUF
10 INCH AGRITUF FIELD CULTIVATOR SWEEP - FOR 47 DEGREE SHANK
SKU: ATSP10-716
Fits John Deere, Krause, Landoll, and other Non-CNH makes. The unique blend of chrome steel provides exceptional long-lasting wear.
Fits John Deere, Krause, Landoll, and other Non-CNH makes. The unique blend of chrome steel provides exceptional long-lasting wear.
$45.35
In stock, 1020 units
AGRITUF
10 INCH AGRITUF FIELD CULTIVATOR SWEEP FOR CASE IH AND DMI
SKU: ATSPC10-716
Fits Case IH and DMI field cultivator shanks. The unique blend of chrome steel provides exceptional long-lasting wear.
Fits Case IH and DMI field cultivator shanks. The unique blend of chrome steel provides exceptional long-lasting wear.
$45.35
In stock, 669 units
AgSmart
7 INCH IRRIGATION SHOVEL - USES TWO 7/16 INCH PLOW BOLTS
SKU: 686-IS7716
$35.07
In stock, 260 units
AGRITUF
10 INCH WINGED POINT FOR POTATO HILLER / DAMMER DIKER
SKU: ATPH10-114
Has shark fin that measures 6" wide by 4-1/2" tall
Has shark fin that measures 6" wide by 4-1/2" tall
$214.20
In stock, 46 units
AGRITUF
2-1/2 INCH WINGLESS POINT FOR POTATO HILLER / DAMMER DIKER
SKU: ATPH-114
Has shark fin that measures 6" wide by 4-1/2" tall
Has shark fin that measures 6" wide by 4-1/2" tall
$155.64
In stock, 285 units
4 x 14 INCH REVERSIBLE CHISEL SPIKE (BEAVERTAIL)
SKU: ATCSB4X1412
DOUBLE SIDED, LONG LASTING AND BUILT TO HANDLE ABRASIVE CONDITIONS.
DOUBLE SIDED, LONG LASTING AND BUILT TO HANDLE ABRASIVE CONDITIONS.
$69.21
In stock, 217 units
Osmundson
24.5 INCH X 6.5MM SMOOTH ROLLABLE EDGE SHALLOW CONCAVITY DISC BLADE WITH 1-3/4 INCH ROUND AXLE - FITS LANDOLL VERTICAL TILL
SKU: 114-246518SPR
Made from Rollalble Steel for easy sharpening. Fits Landoll 7000 Series Vertical Tillage Machines and Sunflower 1211, 1233 Disc HarrowsReplaces Landoll # 172076 / Can Replace SN7588N ( non-rollable edge )
Made from Rollalble Steel for easy sharpening. Fits Landoll 7000 Series Vertical Tillage Machines and Sunflower 1211, 1233 Disc HarrowsReplaces Landoll # 172076 / Can Replace SN7588N ( non-rollable edge )
$76.48
Sold out
AgSmart
8 INCH KNOCK-ON FIELD CULTIVATOR SWEEP
SKU: 686-FMK478
Compares to Nichols UWQ08B120.
Compares to Nichols UWQ08B120.
$17.50
In stock, 1259 units