With a wide variety of tillage tools and parts like field cultivators, sweeps, tines, furrowers, plow shares, moldboards, shins, chisel and subsoiler points, ripper points, oil bath bearings, hipper parts and other tillage tools, Quality Farm Supply has everything you need to break ground, without breaking the bank. Our products fit models like Allis-Chalmers, Case IH, John Deere, Krause, Rome, Sundance, Towner, Sunflower and more.
AgSmart
8 INCH WIDE HARSURFACED FURROWER (NARROW VERSION)
SKU: 686-42411NOH
Compares to Nichols 11N hardsurfaced. Has hole and slot for 7/16" plow bolts with 1-1/4" to 2-1/4" spacing. Used on Eddins and Brandt. Width is 8" at bottom with 11" wing.
Compares to Nichols 11N hardsurfaced. Has hole and slot for 7/16" plow bolts with 1-1/4" to 2-1/4" spacing. Used on Eddins and Brandt. Width is 8" at bottom with 11" wing.
$39.21
In stock, 806 units
AgSmart
GLENCO/AMCO DITCHER BLADE
SKU: 864-SMA100662
Ditcher Blade .375" thick for Glencoe/AMCO PD5-18 and PD10-18 Power Ditcher.
Ditcher Blade .375" thick for Glencoe/AMCO PD5-18 and PD10-18 Power Ditcher.
$16.44
In stock, 133 units
AgSmart
AgSmart® Disc Harrow Spool for Case IH & International, 549976R1
SKU: 864-SMA549976
For 500, 501, 596, 770. Will not fit the 780. Will replace 549976R1.
For 500, 501, 596, 770. Will not fit the 780. Will replace 549976R1.
$70.78
In stock, 196 units
AgSmart
DISC HILLER HUB ASSEMBLY - 315 SERIES
SKU: 2183-3153425
BEARING 851-SMA206GGH REQUIRED FOR ASSEMBLY
BEARING 851-SMA206GGH REQUIRED FOR ASSEMBLY
$76.08
In stock, 123 units
Osmundson
22 INCH X 1/4 INCH SMOOTH CRIMP CENTER BLADE WITH 1-1/2 INCH ROUND AXLE
SKU: 114-221406FP
$53.27
In stock, 206 units
Osmundson
20 INCH X 7 GAUGE SMOOTH CRIMP CENTER BLADE WITH 1-1/8 INCH SQUARE AXLE
SKU: 114-200703FP
REPLACES IH 482973R1.
REPLACES IH 482973R1.
$38.70
In stock, 2 units
AgSmart
2-3/8 INCH SPOOL FOR KRAUSE
SKU: 864-SMAK010
For 1-1/2 inch round axle, 2 3/8 inch deep. Will replace 1280-0-10.
For 1-1/2 inch round axle, 2 3/8 inch deep. Will replace 1280-0-10.
$43.93
In stock, 217 units
20 INCH X 4.5 MM FLUTED COULTER WITH 8 HOLES ON 5 AND 5-1/4 INCH CIRCLE
SKU: 845-F204512
This blade has a smooth beveled edge. If prefer a blade with Rippled Flutes through to the edge - order # 845-R204512S
This blade has a smooth beveled edge. If prefer a blade with Rippled Flutes through to the edge - order # 845-R204512S
$61.25
In stock, 104 units
2-1/8 x 10-13/16 INCH SPINDLE FOR CASE IH 60648 HUB
SKU: 982-1978726
Has 1 hole for 1/2 inch Bolt, 2 inch from back to hole center.Spindle nut and washer sold separatelyReplaces Case/I.H. 1978726C1 for 496 and 3900 Disc Harrows.
Has 1 hole for 1/2 inch Bolt, 2 inch from back to hole center.Spindle nut and washer sold separatelyReplaces Case/I.H. 1978726C1 for 496 and 3900 Disc Harrows.
$38.21
In stock, 2 units
AGRITUF
7 INCH AGRITUF SUPERRIP POINT FOR CASE IH 1-1/4 INCH SHANK
SKU: ATSRC7-114
Replaces 47465172
Replaces 47465172
$205.02
Sold out
Osmundson
20 INCH X 3/16 INCH SMOOTH CRIMP CENTER BLADE WITH 1-1/8 INCH SQUARE AXLE
SKU: 114-203603FP
REPLACES 197604A1
REPLACES 197604A1
$41.98
In stock, 123 units