FOR KMC
QUICK FILTER
FOR KMC
11 products
Showing 1 - 11 of 11 products
Display
View
AgSmart
SUBSOILER POINT 1-1/4"X1-3/4"X11" BOOTED KMC
SKU: 972-15483
1-3/4" wide x 1-1/4" thick x 11" long. Inside width of boot is 1-1/16" for 1" wide shank. Will replace KMC 16-080-096.
1-3/4" wide x 1-1/4" thick x 11" long. Inside width of boot is 1-1/16" for 1" wide shank. Will replace KMC 16-080-096.
$43.76
Sold out
WEAR SHIN FOR KMC
SKU: 972-KMC100
Will replace KMC 17-057-004. 5/16 inch x 1-3/8 inch spirol pin (3) required KMC 17-050-022
Will replace KMC 17-057-004. 5/16 inch x 1-3/8 inch spirol pin (3) required KMC 17-050-022
$15.15
Sold out
AgSmart
RIPPER POINT FOR KMC/UNVERFERTH
SKU: 972-69547KU
Has oblong mounting hole for dual applications, KMC and Unverferth. 1-3/8 inch square base and narrow boot for 3/4 inch shank, wear cap and fin. Will replace KMC 16-080-282.
Has oblong mounting hole for dual applications, KMC and Unverferth. 1-3/8 inch square base and narrow boot for 3/4 inch shank, wear cap and fin. Will replace KMC 16-080-282.
$44.37
In stock, 452 units
AgSmart
SUBSOILER POINT BOOTED KMC
SKU: 972-34800
1-1/4" wide x 1-1/4" thick x 11" long. Inside width of boot is 13/16" for 3/4" wide shank. Will replace KMC 16-080-075
1-1/4" wide x 1-1/4" thick x 11" long. Inside width of boot is 13/16" for 3/4" wide shank. Will replace KMC 16-080-075
$31.56
In stock, 71 units
SUBSOILER POINT FOR JOHN DEERE
SKU: 972-412013JD
Subsoiler Point produced from high carbon steel and heat-treated. Made in the USA Bolt-on - 1 x 2 x 13. Uses 1/2" plow bolt.
Subsoiler Point produced from high carbon steel and heat-treated. Made in the USA Bolt-on - 1 x 2 x 13. Uses 1/2" plow bolt.
$32.24
Sold out
SUBSOILER POINT FOR JOHN DEERE
SKU: 972-412512JD
Subsoiler Point produced from high carbon steel and heat-treated. Made in the USA Bolt-on - 1 x 2 1/2 x 12
Subsoiler Point produced from high carbon steel and heat-treated. Made in the USA Bolt-on - 1 x 2 1/2 x 12
$38.14
Only 1 unit left
ROLL PIN 5/16" X 1-3/4"
SKU: 444-RP516X134
Roll Pin Features are 5/16 Inch x 1-3/4 Inch.
Roll Pin Features are 5/16 Inch x 1-3/4 Inch.
$0.41
Sold out
SUBSOILER POINT CAPPED FOR JD
SKU: 972-412013JDC
Subsoiler Point produced from high carbon steel and heat-treated. With high chrome cap installed. High chrome will outwear plain by up to 10 times. Made in the USA Bolt-on - 1 x 2 x 13 - Capped
Subsoiler Point produced from high carbon steel and heat-treated. With high chrome cap installed. High chrome will outwear plain by up to 10 times. Made in the USA Bolt-on - 1 x 2 x 13 - Capped
$31.75
In stock, 16 units
AGRITUF
AGRITUF RIPPER POINT WITH FIN FOR KMC AND UNVERFERTH
SKU: ATRSPU
Fits Unverferth:
410, 430, 432 Ripper-Bedder
610, 630, 632 Ripper-Roller
310, 312, 330, 332 Ripper Stripper Strip Till Subsoiler
Replaces OEM # 67385, 67951B
$82.59
Sold out
Filters (0)
Categories
QUICK FILTER
ATTRIBUTES FILTER
No results found!
No more results found!