AgSmart
LH SPRING CLOSING WHEEL ARM
SKU: 864-SMA283995
Torsion Spring, Left Hand, for Cast Closing Wheel. For 1560, 1590, 1690, 1860, 1890, and 1990. Will replace JD N282889 and N283995.
Torsion Spring, Left Hand, for Cast Closing Wheel. For 1560, 1590, 1690, 1860, 1890, and 1990. Will replace JD N282889 and N283995.
$9.04
In stock, 387 units
AgSmart
ALUMINUM TRANSFER PUMP 1" IN/OUT
SKU: 900-WP25
2 cycle engine, 2.5 HP, 8000 rpm, 26.4 GPM of water maximum flow, 40:1 fuel to oil mix. Lightweight, only 16 pounds.
2 cycle engine, 2.5 HP, 8000 rpm, 26.4 GPM of water maximum flow, 40:1 fuel to oil mix. Lightweight, only 16 pounds.
$220.80
In stock, 70 units
AgSmart
CAST IRON CLOSING WHEEL
SKU: 864-SMA282110
Cast Iron Closing Wheel. Fits 1560, 1590, 1690, 1860, 1890, 1895, 1990 Grain Drills. Replaces N282110.
Cast Iron Closing Wheel. Fits 1560, 1590, 1690, 1860, 1890, 1895, 1990 Grain Drills. Replaces N282110.
$41.33
In stock, 285 units
AgSmart
DRIVE SPROCKET #50 X 40T 1-1/4" HEX BORE
SKU: 520-58632
Pickup Drive Sprocket, 1-1/4" Hex Bore, 40 Tooth, #60 Chain, Replaces AFH205822. Used on 467, 567, 457, 557, 447, 547, 448, 458, 558, 468, 588, 449, 459, 469, 559, 569.
Pickup Drive Sprocket, 1-1/4" Hex Bore, 40 Tooth, #60 Chain, Replaces AFH205822. Used on 467, 567, 457, 557, 447, 547, 448, 458, 558, 468, 588, 449, 459, 469, 559, 569.
$65.37
In stock, 2 units
AgSmart
LEFT HAND SEED BOOT FOR JOHN DEERE DRILLS - WEAR COAT
SKU: 864-SMA280317
Left hand, heat treated, ductile iron seed boot. Fits 750 and 1850 grain drills. Tunsten carbide wear coated.
Left hand, heat treated, ductile iron seed boot. Fits 750 and 1850 grain drills. Tunsten carbide wear coated.
$50.44
In stock, 55 units
AgSmart
1/2 INCH X 132 INCH 2-WIRE SWIVEL END HYDRAULIC HOSE ASSEMBLY
SKU: 217-8MSNP132
$49.58
In stock, 17 units
AgSmart
15 INCH X 3.5MM HD FERTILIZER OPENER FOR KINZE
SKU: 864-SMA0320
Replaces Kinze GA0320 and GA8845.Has flange and bearing on opposite side of bevel.Uses dust cap 514-32457C.
Replaces Kinze GA0320 and GA8845.Has flange and bearing on opposite side of bevel.Uses dust cap 514-32457C.
$52.05
In stock, 47 units
AgSmart
206 BALL BEARING NO SEALS
SKU: 851-6206
FORD: Ball bearing, PTO front, with 1-1/8" & 1-3/8" shaft. Tractors: 9N, 2N, NAA (prior to 1955). Replaces 9N715BC, JD7681, GA1773
FORD: Ball bearing, PTO front, with 1-1/8" & 1-3/8" shaft. Tractors: 9N, 2N, NAA (prior to 1955). Replaces 9N715BC, JD7681, GA1773
$5.63
In stock, 830 units
AgSmart
CLOSING WHEEL ARM FOR JOHN DEERE 7000 SERIES PLANTERS
SKU: 488-1237340
Closing wheel arm for John Deere Model 7200, 7300, and 7340 planters. Will replace JD AA37839 and AA37552.
Closing wheel arm for John Deere Model 7200, 7300, and 7340 planters. Will replace JD AA37839 and AA37552.
$63.80
In stock, 163 units
AgSmart
SHIFT COLLAR BUSHING FOR CLOSING DISCS
SKU: 488-1236081
Shift collar bushing for disc closing attachment on John Deere Model 7200 and 7300. Also replaces 1236080 on 123056 closing wheel arm. Busihing is .48 ID x 1.25 (Flange base) OD x .985 Tall wall is .59" thick. Replaces A53242
Shift collar bushing for disc closing attachment on John Deere Model 7200 and 7300. Also replaces 1236080 on 123056 closing wheel arm. Busihing is .48 ID x 1.25 (Flange base) OD x .985 Tall wall is .59" thick. Replaces A53242
$4.79
In stock, 1697 units