EXTERNAL

Rubber gear shift boot. 1-7/8" bottom ID, 1/2" hole diameter. Tractors: Avery: A, BF, R. Vintage Iron degree

Carrier for clutch release bearing. Carrier bore 2.228" (2-1/4" approx.); O.D. 2-1/2". Tractors: MF135 (double clutch) and MF399 (6.354 engine). See Applications for more information.

Knob assembly for gear-shift lever. Tractors: 2000, 3000, 4000, 5000, 7000 (1965-1974), 2600, 3600, 4100, 4600, 5600, 7600, 231, 233, 335, 420, 515, 532, 535 (1975-1981), 2610, 2810, 2910, 3610, 3910, 4110, 4610, 5610, 5900, 6610, 7610 (1981-1991), 3230, 3430, 3930, 4130, 4630 (3/1990 & up).

Hi/Lo shifter and control arm kit contains, 17526C1SP shaft, 71531C1SP bar, 398300R1 arm, 380115R2 roller, 398304R1 spring. Tractors: 766 (s/n 17047 & up), 966 (s/n 32222 & up), 1066 (s/n 57646 & up), 1466 (s/n 30001 & up), all 1566, 786, 886, 986, 1086, 1486, 1586, 3088 thru 3788, 6388 thru 6788.

Clutch release bearing carrier. Tractors: 300, 330, 340, 350, 454, 460, 464, 484, 504, 544, 574, 584, 606, 656, 664, 666, 674, 684, 686, 784, 884. Industrials: 2504, 2544, 2606, 2656.

Hi/Lo shifter repair kit. Contains 71526C1SP shaft, 71531C1SP bar.

PTO sleeve. I.D. 1.185", O.D. 1.620", L. 1". For shafts above.

Ball, 1-1/4 inch dia. for high-low gear-shift lever. Tractors: 2000, 3000, 4000, 5000, 7000 (1965-1975), 2600, 3600, 3900, 4100, 4600, 5600, 6600, 7600, 231, 233, 335, 420, 515, 531, 532, 535 (1975-1981). Also used on hydraulic control lever. Tractors: 2600, 3600, 4100, 4600, 5600, 5700, 6600, 6700, 7600, 233, 333, 420, 515, 535 (1975-1981).

Housing, PTO shaft. For all models originally equipped with 1-1/8" spline PTO shaft or TISCO 1-3/8" conversion. Note: OEM 1-3/8" housing is 310089; not availible from TISCO and will not interchange with 9N733B.

Spring, piston return, for multi-power transmission, 6 required. Tractors: MF35, MF50, MF65, MF135, MF150, MF165, MF175, MF180, MF235, MF240, MF245, MF255, MF265, MF270, MF275, MF290, MF298, MF375, MF390, MF398. Industrials: 30.

Gear Shift Boot Seal. For 4-speed transmissions. Tractors: 9N, 2N, 8N, NAA, Jubilee, 501, 600, 700, 800, 900, 2000, 4000 (1939-1964). Replaces 8N7277, C0NN7277.

Gear, transmission countershaft, second gear. Tractors: 8N (1948-1952), NAA (w/4-speed transmission, 1953-1964). 17 teeth. Original gear was 18 teeth.

Gear, transmission mainshaft second gear. Tractors: 8N (w/4-speed transmission, 1948-1952), NAA (w/4-speed, 1955-1964). 56 teeth, 17 splines.

Shifter Knob, Use with 4 speed or torque converter, 3/8 inch-24 thread. Ford/New Holland Tractors: Jubilee, NAA, NAB, 8N (s/n 252844 & up), 501, 600, 601, 700, 701, 800, 801, 900, 901, 1801, 1821, 1841, 2000, 2030, 2031, 2100, 2110, 2111, 2120, 2130, 2131, 2150, 2300, 2310, 3000, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 3550, 4000, 4030, 4031, 4040, 4110, 4120, 4130, 4131, 4140, 4500, 8900. Ford/New Holland Industrials: 340A, 340B, 445A, 540A, 540B, 545A, 340, 420, 445, 450,...

Countershaft. Tractors: 600, 700, 800, 2000, 4000 (1955-1964), 2000, 3000 (4-speed w/transmission PTO, 1965-1970). Can replace NDA7111C.

Rubber gear shift boot. 2-1/16" bottom ID, 11/16" hole diameter. Tractors: G. Vintage Iron